A-Z Scranton Concrete Works

Concrete Foundations and Slabs in Scranton, PA

Strong Concrete Bases for Homes and Small Structures

(570) 774-5505

GRAB THE FREE QUOTE TODAY

Full Name *

Email *

Phone *

About Your Concrete Project:

large area for concrete foundation and slabs poured using truck

A-Z Scranton Concrete Works installs concrete foundations and slabs that support homes, garages, sheds, room additions, and small commercial spaces. We work as concrete foundation contractors and a concrete flatwork contractor. Our focus is simple. Build on a solid base, use the right concrete mix, place steel where it belongs, and pour a slab that stays stable for years.

We handle concrete slab installation for new builds and for replacement work. This includes garage floor concrete, basement concrete floor, utility pads, small shop floors, and light commercial concrete projects. As a concrete contractor, we plan each job for local soil, freeze thaw cycles, and code requirements.

Understanding What the Structure Needs

Each structure needs a foundation or slab that matches its load and layout. Before we start, we look at how the building will sit on the site and what it will carry. This helps us choose depth, thickness, and reinforcement.

We review:

Expected load on the slab or footing
Soil moisture and firmness across the site
Finished floor elevation and slope
Locations for plumbing, drains, and anchor bolts
How the new slab ties into existing residential concrete or block walls

Good planning helps limit uneven settlement and keeps doors, walls, and floors in line. It also sets grade for concrete driveways and patios, sidewalks, and entries that tie into the structure.

Preparing the Ground for a Firm Base

A strong foundation relies on ground that will not shift under load. We excavate to the proper depth, remove soft or organic soil, and place a compacted stone base. Forms then mark the height, shape, and edges of the slab or footing.

Why proper ground prep matters

Reduces sinking and settlement under heavy loads
Helps keep moisture away from the slab and footings
Creates a level platform for reinforcement and vapor barriers
Helps control frost movement in cold weather
Sets correct height for doors, steps, and finished floors

Good ground prep supports the entire project. It also reduces the chance of future concrete repair from base failure.

Reinforcement for Strength and Stability

Concrete is strong in compression but needs steel to handle tension and movement. We install rebar or wire mesh in each slab or footing based on the structure and the soil.

Our reinforcement work can include:

Rebar grids set on chairs in slab on grade floors
Wire mesh in smaller slabs and pads
Thickened edges and strip footings with extra steel
Dowels that tie new slabs into old residential concrete or commercial concrete
Extra bars around column pads and load points

We also plan control joints and saw cuts to guide cracking. This keeps most cracks tight and in straight lines instead of crossing the floor at random.

Pouring and Finishing the Concrete

Once the base, forms, and steel are in place, we pour concrete to the correct thickness and level it across the whole form. We use mixes suited to concrete services, with air entrainment and proper strength for each slab.

Our process includes:

Placing concrete in a steady, even lift
Striking off and leveling with straightedges
Floating and troweling to the right finish for the use
Checking slab thickness and elevation while the concrete is still plastic

For interior floors such as basement concrete floor and shop slabs, we can finish the surface smoother for coatings and epoxy. For utility pads or exterior slabs we often use a light broom or textured finish to improve grip.

We then manage curing so moisture and temperature stay within a safe range. A proper cure helps the slab reach design strength and reduces surface wear.

Types of Foundations and Slabs We Pour

We install several common foundation and slab types:

Slab on grade for homes, garages, and additions
Monolithic slabs with footings formed and poured as one piece
Floating slabs for sheds and small outbuildings
Thickened edge slabs for light commercial concrete projects
Footings for concrete retaining wall work and small concrete walls

Each type is sized for soil conditions and loads. We follow engineer specs and local code where they apply.

Slabs for Garages, Additions, and Light Commercial Use

We pour slabs for many common projects, including:

Attached and detached garage floor concrete
Room additions and porch enclosures
Small offices, storage buildings, and shop floors
Interior basement concrete floor and utility rooms
Equipment pads, compressor pads, and HVAC bases
Small interior commercial concrete floors

Each slab is checked for level, thickness, and layout before the next trade begins framing or setting equipment. As local concrete installers near Scranton, we coordinate with builders so anchor bolts, sleeves, and pipe locations line up with the plans.

Working with Existing Concrete and Repair Needs

On some jobs we remove old slabs before we pour new ones. Poor base, thin concrete, or heavy cracking can make replacement better than patching. We handle tear out, base rebuild, and new concrete slab installation so the structure has a solid base.

If an older floor only has light surface damage, we may suggest concrete resurfacing instead of full removal. We review the condition, check for hollow spots, and look at drainage before we make that call.

(570) 774-5505

GRAB THE FREE QUOTE TODAY

Full Name *

Email *

Phone *

About Your Concrete Project:

Frequently Asked Questions (FAQs)

How long does a new slab or foundation take to cure?

Concrete gains most of its strength in the first week and reaches full design strength at about twenty eight days. Light foot traffic can begin sooner. Heavier loads such as vehicles or equipment should wait until we clear the slab for that use.

Do you handle footings for additions and small walls?

Yes. We form and pour footings for home additions, porch walls, and concrete retaining wall Scranton projects. We size footings for the loads and tie them into existing concrete where needed.

Can you pour foundations in cooler months?

Yes. We can pour in cooler weather with the right timing and materials. We may use blankets, seasonal mix adjustments, or different start times to keep the slab from freezing during early cure.

Do you install vapor barriers and insulation under slabs?

We can place vapor barriers under basement concrete floor and other interior slabs when needed. If plans call for rigid insulation, we install that as well before we set steel.

Start Your Foundation or Slab Project the Right Way

If you need a slab or foundation for a new structure, or you want to replace a weak floor, we can walk the site and outline a simple plan. We check soil, grade, drainage, and access before we give a written estimate.

Call (570) 774-5505 to schedule a foundation and slab review with A-Z Scranton Concrete Works and talk through your concrete foundation contractors and concrete slab installation needs.